HYPER GOGO S9 Plus Assemble & Maintenance Guide

Getting a new electric motorbike ready should feel exciting—not confusing. Below is a practical, parent-friendly guide to help you set up the HYPER GOGO S9 Plus, charge it correctly, understand the controls, and ride safely from day one.

Before You Start: Age Safety Basics

This motorbike is designed for riders 14+. Adult supervision is required, and children under 14 should not operate it.

Always ride with protective gear:

• A properly fitted helmet (chin strap buckled)

• Elbow pads and knee pads

• Closed-toe shoes with laces secured (no sandals)

Where to ride

Use it in large, open areas on private property. Avoid traffic, public roads, sidewalks, steep inclines/steps, pools, and other bodies of water.

What’s in the Box

Inside the package you’ll typically find:

• Semi-assembled motorbike

• Storage box lid

• Handlebar clamps and bolts

• Pedals

• Charger

• Allen keys (3mm / 5mm / 6mm)

• User manual

Tip: If anything looks missing or damaged, pause assembly and contact support before riding.

Assembly

Adults must assist with assembly and initial adjustments.

1) Install the handlebars

1. Place handlebars into the handlebar clamp in an upright, vertical position.

2. Insert bolts and tighten securely.

3. Confirm the handlebars do not move forward or backward.

Note: Take care to avoid pinching throttle/brake wires during installation.

2) Install the pedals

1. Insert the pedals.

2. Tighten until secure.

3) Connect the cables

Make sure all cables are connected correctly before use.

First Charge: Do This Before the First Ride

Charge the motorbike fully before use.

Charging steps

1. Make sure the motorbike is powered off.

2. Plug the charger into the wall outlet.

   • The charger light should be green (try another outlet if it doesn’t turn on).

3. Open the charging port cover and connect the charger to the bike.

   • The charger light will be red while charging and turns green when fully charged.

Charging safety reminders

• Use only the specified 42V charger.

• Charge in a dry, well-ventilated area.

• Avoid extreme temperatures (storage below 32°F/0°C or above 122°F/50°C; charging below 14°F/-10°C or above 122°F/50°C can damage the battery).

• Do not place objects on the charger or use damaged cords.

• Lithium battery warning: improper use may cause serious injury or death.

Know Your Controls

Key parts include the display, throttle, horn switch, brake, headlight, storage box, kickstand, charging port, and indicator lights.

Power On/Off + Gear/Mode button

• Press and hold 2 seconds to turn on/off.

• Short press to switch gears (speed modes).

• Short press twice to switch speed unit (mph/km/h).

• Short press three times to switch engine sound.

Starting & stopping

To start: sit on the bike, power on, keep both hands on handlebars, and apply throttle with the right hand.

To stop: release the throttle and apply brakes until fully stopped.

Speed Modes

There are 3 speed levels (shown as 1 / 2 / 3 on the display):

• Mode 1: 5 mph

• Mode 2: 7.5 mph

• Mode 3: 10 mph

Start in the lowest mode until the rider is confident and consistent with braking and balance.

LED Lights

The motorbike includes two types of lighting (motorbike lights + spotlight).

• Press and hold the light button for 2 seconds: headlight on/off

• Press twice quickly: atmosphere light on/off

• Press once quickly: cycle lighting effects (rainbow flow, rainbow breathe, green, purple, red)

• You can also control lights via the app.

Engine Sound Modes + Bluetooth Music Note

There are three sound modes (including a silent mode). When playing music via Bluetooth, the engine sound is muted and only music plays.

Simulated Exhaust “Smoke” Function

Default setting is OFF at startup. To use:

1. Open the water filling port cap.

2. Add an appropriate amount of water.

3. Press the switch button to turn it on; press once to turn it off.

Pairing Bluetooth + App

To connect:

1. Ensure Bluetooth is enabled on your device and the motorbike is turned on.

2. Open the motorbike app and connect wirelessly.

3. In your Bluetooth list, select “Hypergogo”.

In the app, you can customize LED lights, set working modes, and adjust speed mode settings (Kids/Normal/Sports with max speeds 5 / 7.5 / 10 mph).

Maintenance & Storage

Routine checks keep rides safer and extend product life:

• Check nuts/bolts regularly and tighten if needed.

• Replace worn parts immediately.

• Check screws and protective covers; inspect plastic parts for cracks.

• Store indoors during snowy/rainy weather; do not ride in wet or snowy conditions.

• Clean with a dry cloth; for plastic parts, use non-wax furniture polish if needed. Do not spray with a hose or submerge.

• Check tire pressure and tread wear; inspect for punctures or damage.

• Before each ride, inspect frame/handlebars for cracks or broken connection points.

Indicator Codes

If you see a headlight LED code, use this quick reference:

If a code persists, stop riding and contact support.

Need Help?

If you have any setup, charging, app, or error-code questions, contact our support team at support@hypergogo.com.

FAQ

How long should I charge it the first time?

Charge fully before the first ride; the charger indicator turns green when fully charged.

What’s the safest speed mode to start with?

Start with Mode 1 (5 mph) and move up only when the rider can brake smoothly and stay in control.

Why don’t I hear engine sound when music is playing?

When music plays via Bluetooth, engine sound is muted by design.

Can I ride in wet conditions?

No—avoid wet or snowy conditions and store indoors during rainy/snowy weather.

The display shows an “E” code—what should I do?

Stop riding, note the code (E0–E6), and contact support if it persists.